{
	"type":"link",
	"version":"1.0",
	"provider_name":"Djem Guerreru Inc.",
	"provider_url":"https://www.djemguerreru.com",
	"cache_age":21600,
	"title":"Permatex 1 Minute General Purpose Gel Epoxy - .84oz",
	"author_name":"JOITO's",
	"author_url":"https://www.joitos.com",
	"thumbnail_url":"https://cdn.joitos.com/GENERAL/20/203/2034/20344183.V0.jpg",
	"thumbnail_width":400,
	"thumbnail_height":250,
	"url":"https://www.joitos.com/item/45552397/Permatex%2D1%2DMinute%2DGeneral%2DPurpose%2DGel%2DEpoxy%2D%2D%2D%2E84oz",
	"description":"<p><strong>1 Minute General Purpose Gel Epoxy - .84oz</strong></p><p>General Purpose 1 Minute Gel Epoxy is a fast setting, two-part adhesive and filler system specially formulated with a Blue Dye Indicator that disappears when it&rsquo;s fully mixed and ready to use. The advanced gel formulation reduces mess and waste compared to traditional epoxies; unique indicator system takes the guesswork out of &ldquo;ready to use&rdquo;.</p><p><strong>Features:</strong></p><ul><li>Non-drip formula allows for mess free application</li><li>Can easily be applied to overhead and hard to reach places</li><li>Sets in just 1 minute/Cures in 5 minutes</li><li>Blue dye indicator disappears when epoxy is ready to apply</li><li>No clamping required</li><li>Bonds to metals, hard plastics, ceramics, and more!</li></ul><p><strong>Applications:</strong></p><ul><li>Automobile - Suggested Applications: Ideal for complex, multi-piece assemblies. Bonds rigid materials including, ceramic, chrome, fabric, fiberglass, glass, hard plastic, and metal and rubber.</li></ul><p><strong>Directions:</strong></p><ol><li>PROTECT: Work area must be protected from accidental spills.</li><li>CLEAN: Surfaces must be clean, dry and free of grease and oil.</li><li>PREPARE: Roughen smooth surfaces (using abrasives or sandpaper).</li><li>OPEN PACKAGE: Remove Syringe. Turn syringe nozzle end up and pull plunger back slightly (1/8&rdquo;). Allow air bubbles to rise to top. Snap off and save storage cap. Push plunger to dispense equal amounts of hardener and resin onto discard-able surface such as a piece of cardboard. Mixing paddle will pop out from plunger. Pull back plunger tostop flow. Snap cap back on.</li><li>MIX QUICKLY: Quickly and thoroughly mix until blue color turns clear (about 15 sec).</li><li>&nbsp;APPLICATION: Apply small amount of mixture to both surfaces and assemble parts immediately (product sets in approximately 60 seconds). Remove any excess epoxy immediately.</li><li>CURE TIME: Usable strength is reached in 1 hour at 72&ordm;F (22&ordm;C).Cooler temperatures may require longer set time.</li><li>CLEAN-UP: Attach nozzle cap and store in molded tray.</li></ol><p>NOTE: Adhesive will not bond most polyethylene or polypropylene plastics.</p> <!--- cis2:mmxtmJVt ---><br>",
	"price":6.75,
	"currency_code":"USD",
	"quantity":0,
	"category":""
}