link 1.0 Djem Guerreru Inc. https://www.djemguerreru.com 21600 JOITO's https://www.joitos.com https://cdn.joitos.com/GENERAL/17/177/1777/17774874.V0.jpg 400 250 https://www.joitos.com/item/35291284/NavPod%2DGP2170%2D05%2DSystemPod%2DPre%2DCut%2Df%2FRaymarine%2Des127%2Fes128%2D%26%2D2%2DInstruments%2Df%2F12%27%2DWide%2DGuard GP2170-05 SystemPod Pre-Cut for Raymarine es127/es128 & 2 Instruments for 12' Wide Guard

Instrument Cut Out Size:3.6' Hole

NavPod GP2170 Series for 12' Guard, SystemPods are for mounting multiple pieces of electronics in one NavPod. This is a good way to reduce the height of a system. In addition to mounting a radar or chartplotter, you can have room for an autopilot, instrument, stereo controller, or VHF mic.
A SystemPod is best mounted on a Single Bend AngleGuards. The single bend AngleGuard for this model is the AG218.

The Hi-Gloss Material

• NavPods are manufactured with a custom co-extruded acrylic capped
  ABS material. We use the absolute best UV resistant material that provides a
  very high gloss white finish that matches gel-coated fiberglass. The Gen3
  enhancements now include a thicker gauge material that improves strength and
  provides for better structural rigidity.

The Waterproof Seal

• All NavPods are manufactured with a double gasket system providing
  an excellent watertight seal between the front and back of the NavPod for
  protection of your Marine Electronics. NavPods are made to withstand the
  harshest of wet offshore boating conditions. Gen3 enhancements include a
  thicker external silicone gasket with improved flush fit. The internal EPDM
  gasket is now 50% thicker and is not subject to 'compression set' like many
  rubber compounds. This is important when you need to open the NavPod in the
  future to service your electronics.

The Nickel Chrome Plated Screws

• We use all stainless steel mounting hardware that is supplied with
  each NavPod. Large round head tamperproof screws have deeper sockets for the
  NavPod wrench for better holding ability when tightening than the previous
  screws. For Gen3 we provide nickel chrome-plated stainless steel tamperproof
  screws for security combined with a little bling!

The Manufacturing Process

• Heavy-gauge thermoforming is considered an art since many processes
  come into play. It all starts with the design and development of the
  tooling. We are fortunate to have experienced in-house design engineers who
  utilize CAD programs like Solidworks, Catia and AutoCad. Surfcam is used to precision tolerances.

Our Commitment to Quality

• We are committed to producing the best possible waterproof housing
  for Marine Electronics. Now with two decades of experience under our belt,
  we are confident you will have years of trouble free service and a long
  lasting high gloss finish. We will stand behind our commitment by now
  offering a 10-year warranty on all new Gen3 NavPods.

449.57 USD 0 Electronics & computer--Marine--Electrical