Permatex High Strength Threadlocker RED Gel Squeeze
Rated 3/5
based on 1 customer reviews
by Joitos.com,
Be the first one to review this product.
p strong High Strength Threadlocker RED Gel Squeeze strong p p OEM specified Gel formula provides ldquo liquid-reliability rdquo without drips globs mess or waste Available in three convenient sizes the GEL TWIST trade pin-point applicator the GEL SQUEEZE trade applicator or the single-use pouch puts the Threadlocker right where you want it hellip on the part High strength threadlocker for heavy-duty applications 3 8 inch to 1 inch 10mm to 25mm Especially well-suited for permanently locking studs and press fits Adds 3 000 PSI holding power on slip and press fit assemblies Replaces set screws and snap rings Locks against vibration loosening May require heat or special tools for removal Conforms to ASTM D5363 AN0221 Mil-S-46163A Type I Grade K nbsp p p strong Applications strong p ul li Automobile - Suggested Applications Cylinder block and rocker arm studs ring gear bolts frame bolts shock absorber bolts also ideal for vertical applications li li Heavy Duty - Suggested Applications Cap screws and mounting studs on differentials li ul p strong Directions strong p p Parts should be clean and oil free p ol li Remove protective cap li li Turn dial to expose 1 8 Prime to 1 4 Prime of material beyond tip li li Apply threadlocker to leading edge of male fitting covering 5 to 6 threads Avoid direct contact of tip to metal surface li li Assemble parts and tighten to recommended torque li li Replace protective cap If contact occurs expose 1 16 rdquo of material and wipe off with a clean towel Temperature range -65 deg F to 300 deg F -54 deg C to 150 deg C Refer to Technical Data Sheet for complete information li ol p NOTE Permatex reg Threadlocker Gel should not be used on plastic fittings Do not use on food contact surfaces Avoid food contamination during use and storage p --- cis2 mmxtmJVt --- br
No Reviews Yet
